600 mA Regulated Switched Mode PSU Plug-in Power Supply - P003B
600 mA Regulated Switched Mode PSU Plug-in Power Supply - P003B
600 mA Regulated Switched Mode PSU Plug-in Power Supply - P003B

600 mA Regulated Switched Mode PSU Plug-in Power Supply - P003B

Product code: ELV01 - 5021196658504 - P003B
Qty From Qty To Unit Price
1 £6.50
2 4 £6.43
5 9 £6.32
10 ∞ £6.11
600 mA Regulated Switched Mode Plug-in Power Supply with 6 Output Voltages and 6 DC Interchangeable Plugs. Our Order Code: P003B
600 mA Regulated Switched Mode Plug-in Power Supply with 6 Output Voltages and 6 DC Interchangeable Plugs. Plug-in regulated power supply with 3-12 V DC switchable output. LED indicator and selectable polarity. Comes complete with 6 DC adaptor plugs. Features include, IC regulated DC output, short circuit protection and automatic overload cut off.

DISCOUNTS AVAILABLE FOR BULK ORDERS & EDUCATION PURCHASE ORDERS PLEASE CALL 01254 674444 FOR DETAILS
 
Colour Black
Dimensions (mm) 67x50x60
Weight (kg) 0.3
Power Input 230 V AC @ 50 Hz
Plug Type UK
Packing Retail Box
Connectors 6 Interchangable DC adaptor plugs
Outputs 3, 4.5, 5, 6, 7.5, 9, 12 V DC
Continuous Current (A) 600 mA


Our Order Code: P003B

Our Loc: BCT016

Technical Specification:
Input: 100-240V AC 60/50Hz     0.16A
Output: 3.0/4.5/5.0/6.0/7.5/9.0/12V DC   600mA
 
 
Instructions:
Please read the following instructions step-by-step before using the adaptor.

  1. VOLTAGE: Set voltage selector switch in accordance with the voltage requirement of your electronic unit.
  2. MILLIAMP (mA): Verify the mA requirement of the unit and determine if it can be used with a 600mA power supply.
  3. POLARITY: Determine the polarity (+ or -) of the unit and set the polarity according to the polarity of the electronic unit. The polarity can be found on the unit or in the user manual.
NOTE: The positive setting (Negative ground) is the most common requirement.
  1. OUTPUT PLUG: Select a proper output plug and plug it into the jack on the electrical appliance.
  2. PLUG IN: Attached the adaptor into a 100-240VAC mains socket. The LED lights indicating that the unit is on.
  3. IMPORTANT: If unit does not operate properly, check the polarity setting IMMEDIATELY.
  4. Remove the unit when not in use.

Warnings:
  1. For indoor use only.
  2. For office equipment use only.
The socket-outlet shall be installed near the equipment and shall be easily accessible
Code ELV01 - 5021196658504 - P003B
Weight 0.5kg

You may also like