PULSE Trekker i300 Portable PA System with iPod® Dock

Product code: DP32197
£139.99
Pulse TREKKER i300 Portable PA System. The ultra portable TREKKER i300 from PULSE is ideal for schools, parties and general music playback Our Order Code: DP32197
Pulse TREKKER i300 Portable PA System. The ultra portable TREKKER i300 from PULSE is ideal for schools, fitness instructors, small dance groups, parties and general music playback from a range of audio sources including iPod’s® featuring the 30-pin Apple® connector. The two-way speaker system relays powerful bass with crystal clear highs. A built-in rechargeable battery allows the performance to continue far away from the ties of a mains voltage supply.

Built-in rechargeable battery for up to 8 hours use
  • Powerful 30 watts peak output
  • Two-way system with 8" woofer and dome tweeter
  • Retractable trolley handle plus ultra smooth wheels for ultimate portability
  • High quality microphone and lead included
  • Multiple input options
  • iPod dock with charging system
  • Spring loaded handles
  • Battery level indicator
  • Tough, protective metal front grille and corner guards
  • 35mm (13/8") top hat for stand mounting (stand not supplied)
  • 240V/120Vac switchable mains input
  • Frequency response - 70Hz-50kHz
  • 15Wrms/30Wpeak (1% THD)
  • Dimensions (WxHxD) - 386x456x307mm
  • Weight - 17.5kg


(PICTURE 3) TOP OF PULSE TREKKER i300 
 

12) Microphone Storage. The system has sufficient space to store its own vocal microphone and microphone lead. These are stored in
underneath the flap as indicated.
13) iPod® Dock. An Apple® iPod® compatible dock suitable for most iPod’s®. Remove the rubber protector from the connector and
dock the iPod®. Once docked the support should be adjusted to prevent strain on the 30-pin connector – failure to ® before transportation.iPod® connector. Remove the iPod’sdo so may result in damage to the system or the
(PICTURE 4) CONTROLS ON PULSE TREKKER i300 1) Balanced Microphone Input The Microphone input accepts either a 6.35mm (¼”) balanced jack or balanced XLR input. Before connecting any source turn the volume knob anti-clockwise to the minimum setting. After connection with the audio source has been made the volume knob should be adjusted carefully in small increments to avoid feedback.
2) Instrument/Microphone Input The Instrument/Microphone input accepts either a 6.35mm (¼”) unbalanced jack. Before connecting any source turn the volume knob anti-clockwise to the minimum setting. After connection with the audio source has been made the
volume knob should be adjusted carefully in small increments to avoid feedback.
3) CD/Tape Input The CD/Tape input accepts either a line level stereo audio signal via two phono sockets. Before connecting any source turn the volume knob anti-clockwise to the minimum setting. After connection with the audio source has been made the volume knob should be adjusted carefully in small increments. The volume control on this input is shared with the iPod® dock – adjusting the level will alter the sound of both the CD/Tape and the iPod®.
4) Equalisation (EQ) Control Adjustment for boosting or cutting the Bass, Mid or Treble frequencies. These alter the master output only, there is no control for EQ control on each individual output. Turn anti-clockwise to cut (reduce) or clockwise to boost (add).
5) Master Volume Control Overall volume control for the system. Turn the control anti-clockwise to reduce the sound level or clockwise to
increase. Care must be taken with the volume control as excessive volume can damage a person’s hearing.
6) iPod® Charge When switched to the ON position the iPod® will be charged from the internal battery. When switched to the OFF position the iPod® will not be charged. Due to the changes made by Apple® to the configuration of the 30-pin connector not all iPod’s® will charge via this system.
7) Mains Inlet (IEC) Insert the supplied mains cord into the mains inlet. The unit can operate from mains power or the internal battery. The internal battery will only charge while the Power Switch (8) is in the OFF position. The inlet is fused with a T0.5A 250V 20x5mm mains fuse. Should the unit require a replacement fuse please ensure a replacement is fitted of the same type and value. When charging the LED to the right of the mains inlet will illuminate.
8) Power Switch On/Off control for the system. When the system is powered on the LED next to the Master Volume will illuminate.
9) Link Output A mono line level output via a 6.35mm (¼”) Jack for linking to another PA system or powered speaker. If using another TREKKER i300 the LINK out of the master system should be connected to the CD/TAPE IN on the slave system.
10) Battery Level Indicator When switched on and fully charged all four LED’s will illuminate, as the battery discharges the LED’s will gradually extinguish until only the red LOW LED is illumitaed, at this point the system requires recharging. Battery life will vary
depending upon the system volume and the ambient temperature.
11) Voltage Selector The system can be operated from either a 240Vac or 110Vac mains supply. The PA System will be supplied with the
slide switch in the correct position for your local market. DO NOT alter the setting without first confirming the mains
supply available as the incorrect setting could damage the system.
Our Order Code: DP3219715
Code DP32197
Condition New
Weight 20kg