TOA VM2240 5 zone 100V Line PA Tannoy Amplifier 240w

Product code: ELV01 - TOA061 - 5021196182412
Transmits background music, paging, and emergency announcements up to 5 different zones

TOA VM2240 5 zone 100V Line PA Tannoy Amplifier 240w

Purchased on order request.



The VM-2000 series is an integrated broadcast system for both commercial and voice evacuation purposes which corresponds to the main requirements of EN60849; the European standard of voice evacuation system.

The system consists of a system management amplifier such as VM-2120 and/or VM-2240, and remote microphone RM-200M. The standard system of VM-2000 transmits background music, paging, and emergency announcements to 5 different zones individually or to all the zones at once. Targeted at medium-sized facilities, every VM-2000 Series unit offers three line/Mic inputs, 2 BGM inputs and remote Mic capability as well as telephone paging. Operation is simple and trouble-free for site staff. With an optional surveillance board; SV-200MA, the system surveys and indicates the status of a power amplifier circuit, speaker lines with a ground leakage accident and open/short on each speaker line.

The VM-2240 is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with 4 audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-zone selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions(*1) in an emergency situation.

Broadcast can be made from an optional RM-200M Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, for 100 V/42 Ω application the unit features the surveillance function(*2) which automatically checks the system for failures. (*1) An optional EV-200M Voice Announcement Board is required. (*2) An optional SV-200MA Surveillance Board is required. 

Power Source

  • AC: 120 V AC, 50/60 Hz
  • DC: 24 V DC/15 A , M3.5 screw terminal, Barrier distance: 8 mm,
  • Applicable cable diameter: AWG22 - AWG14

Power Consumption on AC Mains

  • With no signal present: 54 W
  • Under normal operating conditions according to
  • EN60065: 1998 sec. 4.2: 255 W
  • With rated output signal: 549 W

Current Consumption on 24 V DC Power Input

  • With no signal present: 1 A
  • Under normal operating conditions according to
  • EN60065: 1998 sec. 4.2: 5 A
  • With rated output signal: 14 A
  • Rated Output 240 W
  • Output Voltage /Impedance 100 V/42 Ω, 70 V/21 Ω, 50 V/10 Ω (selectable by the internal wiring change)
  • Frequency Response 50 Hz - 16 kHz
  • Distortion Under 1 %
  • Signal-to-Noise Ratio Over 60 dB
  • Tone Control Bass: 100 Hz ±10 dB, Treble: 10 kHz ±10 dB (Inputs 1 - 3 and BGM individually adjustable.)

Code ELV01 - TOA061 - 5021196182412