product review overlay image
Tascam TM-DRUMS Microphone set for drums
Tascam TM-DRUMS Microphone set for drums
Tascam TM-DRUMS Microphone set for drums
Tascam TM-DRUMS Microphone set for drums
Tascam TM-DRUMS Microphone set for drums

Product Description

Tascam TM-DRUMS Microphone set for drums
(This item is supplied to order only)


TM-DRUMS is a set of four microphones tailored for getting a good drum sound with ease using a Tascam multi-track recorder or audio interface with DAW software. Especially designed for beginners who cannot afford separate mics for each and every part of the drum kit, this mic set meets the minimum requirements for multi-microphone recordings and can even be handled by people who are not yet so familiar with creating a good sounding mix with many sources.

TM-DRUMS comprises of one dynamic mic designed for the bass or kick drum, another dynamic mic designed for the snare, and two condenser mics that can be used for hi-hat, toms and cymbals. Each of the three mic types has its own special characteristics to enhance the instrument it was made for.

The TM-50DB's frequency response delivers a thick bass thump with the right amount of punch, while the TM-50DS enhances the special character of the snare drum with attack and clarity. The TM-50C microphone can be used as an overhead microphone to capture the sound of your hi-hat and cymbals. As a condenser microphone, it handles high sound pressure levels and captures a wide frequency range. Since there are two of these in the set, you can also use that pair to easily create a stereo recording of the entire drum kit, supported by the two mics for kick and snare drum.

Creating a great-sounding drum sound is not hard to accomplish. With two overhead microphones and separate mics for the kick drum and snare drum, you'll get a wide stereo image with clear highs. Start with the overheads and try out different positions until you find that toms, cymbals and hi-hat build a balanced base sound. Then, add a thick kick drum and a well-defined snare drum to that base sound with their separate mics.

If a clear hi-hat is important to your music, you can emphasise it by placing one of the TM-50C over the hi-hat and use the second TM-50C as overhead on the other end of your drum kit. By going this way, you will have more influence on the basic instruments: kick, snare, and hi-hat.

You will certainly find a good position for the overhead mic were it can capture the rest of your kit. This approach does not deliver a stereo image like with two overheads but it still gives you some amount of width when panning the hi-hat to one side and the overhead to the other side.

Once you created your basic drum sound and you're familiar with multi-microphone recording, it is easy to add more mics. Is your drum kit located in a room with a nice ambient sound? Why not add that room ambience to make your sound more natural?

Delivery & Returns

Tascam TM-DRUMS Microphone set for drums

Sorry Currently Out of Stock

Tascam TM-DRUMS is a set of four microphones tailored for getting a good drum sound with ease using a Tascam multi-track recorder or audio interface with DAW software.

Recently viewed products

AUDIO TECHNICA ATW-A49 PAIR OF WIDE BAND AERIALS PADDLE ANTENNA 440 to 990 Mhz

Heavy Duty Junction Box, 30A, 3 x Terminals, White Round junction box, rated at 30A - Order Code: 01061314

These 4 Zone Mixer Amplifiers are ideal for systems where multiple zones are required. Designed for use in schools, churches, entertainment venues or commercial buildings etc.

4 Ultra bright LED's fitted in the end of a 360mm flexible black gooseneck. The gooseneck is fitted with a standard XLR male socket.

425mm Chrome Gooseneck Microphone Stand Holder with Female XLR and inbuilt cable for installations.

KAUDEN US201 RJ45 CAT5e & CAT6 NETWORK CABLE EXTENDER COUPLER

NJS Heavy Duty Folding Floor Standing Guitar Stand Excellent value and protection for your guitar. Size 440x380x100 mm.